• Bluetooth v4.0, single mode compliant- Supports master and slave modes
  
• Integrated Bluetooth low energy stack
• GAP, GATT, L2CAP, SMP
• Radio performance

- TX power: +0 dBm to -27dBm

- RX sensitivity: -83dBm to -89dBm

• USB and virtual COM port emulation
• Bluetooth end product, CE, FCC, IC, KCC and MIC (Japan)

BLED112

BLED112 Bluetooth Dongle integrates all Bluetooth 4.0 single mode features. The USB dongle can simulate standard USB device and virtual COM port. The COM port emulation enables simple host application development using a simple application programming interface.

The BLED112 can be used for Bluetooth low energy development. With two BLE112 dongles you can quickly prototype new low energy application profiles by utilizing Bluegiga BGProfile Toolkit™ and also automate inmodule software functions with BGScript™.

Target Applications:

• Human Interface Device hosts
• Sports and fitness
• PC security
• PC accessories
• Bluetooth low energy connectivity

• Bluetooth 4.0, single mode compliant- Supports master and slave modes

• Integrated Bluetooth low energy stack
  - GAP, GATT, L2CAP, SMP
  - Bluetooth low energy profiles as a reference

• Flexible and simple in-module development:
  Profle ToolkitTM, BGScript™

• Radio performance
  - TX power: +3 dBm to -25dBm
  - RX sensitivity: -85dBm to -91dBm

• Ultra low current consumption
  - Transmit: 27mA (0 dBm)
  - Sleep mode 3: 0.4uA

• Programmable 8051 processor for embedding full applications

• Bluetooth end product, CE, FCC, IC, KCC and MIC (Japan) compatible

BLE112

In-module software development can be done with Bluegiga's Profile ToolkitTM offering environment for rapid Bluetooth profile development. Bluegiga's BGScriptTM enables developers to automate in-module software functions making Bluetooth low energy application development extremely simple.

BLE112 Bluetooth smart module can be power directly from a standard 3V coin cell battery or pair of AAA batteries. In lowest power sleep mode it consumes only 400nA and will wake up in few hundred microseconds.

Markets

• Sports and fitness
• Healthcare and medical
• Smart energy
• Automation
• Security and proximity
• Entertainment
• Automotive

• Bluetooth 2.1 + EDR
• Integrates a Bluetooth radio, Bluetooth stack and profiles
• Exceptional radio performance, Transmit power : +20dBm, Receiver sensitivity: -90dBm
• Available with high efficiency chip antenna or U.FL connector
• Industrial temperature range -40°C to +85°C
• Up to 14 supported Bluetooth profiles in iWRAP firmware
• Standard HCI over UART or USB
• Bluetooth end product, CE, FCC and IC qualified

WT41

WT41 comes with Bluegiga's iWRAP firmware offering the users a simple software integration without the need of Bluetooth protocol or profile development. iWRAP is an embedded Bluetooth stack firmware for Bluegiga's Bluetooth modules. It exposes a powerful but easy-to-use command interface to manage Bluetooth operations. iWRAP hides the complexity of Bluetooth protocol stack and profiles from the end user.

• Bluetooth Class 2
• Plug n’ Play Bluetooth  Audio Solution for Mono and Stereo Applications
• Integrated DSP, Stereo Codec and Battery Charger
• Chip Antenna or W.FL Connector
• Bluetooth 2.1+EDR Compliant
• Bluetooth End Product, CE, IC and FCC Qualified
• Class 2 - Range up to 30 Meters
• Industrial Temperature Range from -40C to +85C
• Based on CSR BC05 chipset
• Low Power Consumption
• iWRAP™ Firmware for Controlling Connections and Configuring Settings
• Supported Bluetooth Profiles: A2DP, AVRCP, HFP (v.1.5), SPP, OPP and HID

WT32

The embedded DSP core allows enhancement of the product with features such as advanced audio decoding, echo cancellation, noise reduction and data manipulation. WT32 combined with Bluegiga’s flexible iWRAP firmware enables device manufacturers to easily add wireless, secure and standard based Bluetooth connectivity into new or existing applications with minimized development and manufacturing effort. The module is Bluetooth end-product, CE, FCC and IC certified.

Key Features:

• Highly integrated and cost effective Bluetooth HCI module
• Bluetooth Class 1 radio based on CSR’s BlueCore-6
• Integrated Antenna or RF pin
• Small size: 17 x 11 x 3 mm
• Bluetooth 2.1 + EDR Compliant
• Bluetooth Controller Subsystem CE, FCC and IC Qualified
• Industrial Temperature Range from -40C to +85C
• 801.11 Co-existence interface
• AuriStream baseband codec, which provides better audio quality
• Supports any Bluetooth stack with HCI interface

WT21

• Bluetooth Class 2
• Integrated chip antenna
• Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps
• Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence
• USB version 2.0
• UART with bypass mode
• 8MB of flash memory
• Supported profiles: SPP, DUN, OBEX and HCI*
• Support for custom applications
• Industrial temperature range from -40C to +85C
• RoHS compliant
• Pin-to-pin compatible with Bluegiga WT11 module
• Simple iWRAP™ firmware for controlling Bluetooth wireless technology
• Fully qualified end product with Bluetooth 2.0+EDR, CE and FCC

Description:

WT12 is a next-generation, class 2, Bluetooth 2.0+EDR (Enhanced Data Rate) module. It introduces three times faster data rates compared to existing Bluetooth 1.2 modules even with lower power consumption! WT12 is highly integrated and sophisticated Bluetooth module, containing all the necessary elements from Bluetooth radio to antenna and a fully implemented protocol stack. Therefore WT12 provides an ideal solution for developers who want to integrate Bluetooth wireless technology in to their design with limited knowledge of Bluetooth and RF technologies.

WT12 module combined with Bluegiga's complete development, testing and verification service offering and excellent developer support, OEMs and designers ensure that their products reach the market rapidly and cost-effectively in relation to time and resources. Bluegiga has in-house knowledge of both software and hardware offering customers a single point of contact to all Bluetooth related issues.

• Bluetooth v.2.1 + EDR, class 1
• Radio performance - transmit power: +17 dBm - receiver sensitivity: -86 dBm
• Integrated iWRAP Bluetooth stack - 14 integrated Bluetooth profiles - simple ASCII based host protocol
• Integrated chip antenna or U.FL connector
• Standard HCI over UART or USB
• Industrial temperature range: -40C to +85C
• Bluetooth end product, CE, FCC and IC
• WT11i with integrated chip antenna and HCI USB 2.0 + EDR WT11i-A-HCI

Description:

WT11i is a fully integrated Bluetooth 2.1 + EDR, class 1 module combining antenna, Bluetooth radio and an on-board Bluetooth stack. The WT11i module utilizes Bluegiga's latest generation RF technology and provides better performance than its predecessor WT11. For OEMs WT11i offers trouble free Bluetooth integration for applications where the best performance is needed and it is a drop-in performance upgrade for designs where WT11 is already used. WT11i comes with Bluegiga's iWRAP firmware offering the users simple software integration without the need of Bluetooth protocol or profile development.

Access Server with Internal Antenna

Description:

WRAP Access Server™ is a cutting edge wireless Bluetooth router. It supports multiple communication standards including Ethernet, Wi-Fi, and GSM/GPRS enabling full media-independent TCP/IP connectivity. WRAP Access Server™ is easy to deploy and manage in existing wired and wireless networks without compromising speed or security. For very fast deployment, WRAP Access Server™ configurations can easily be copied from one device to another using USB memory dongles. The device can be conveniently managed and upgraded remotely over SSH secured links and by supporting SNMP (Simple Network Management Protocol), WRAP Access Servers can also be connected to customer’s management and monitoring systems.

Blugiga Solution Manager

Description:

Bluegiga Solution Manager makes it possible to manage deployments of Bluegiga Access Servers from a single point by a heterogeneous group of administrators and users. BSM also enables content management for the Bluegiga ObexSender application - targeted for Bluetooth Marketing solutions.

BSM is designed for companies looking for a ready-made management tool, and companies that need a customizable platform for tailoring the user interfaces and re-branding the system. BSM is available as a hosted service or as a CD-ROM delivery for customers that install the system on their own server hardware. In addition, the price of the system is reasonable.

BSM Softwares and Bluegiga Access Servers are targeted at system integrators, developers and original equipment manufacturers that want  to deploy a secure, cost-efficient, low power consuming wireless network for Bluetooth-equipped devices.